Optical Fiber Coloring Machine – Maybe You Have Thought About The Reason Why You Will Be Needing This..

Fiber proof testers are created to use a set load to Fiber coloring machine in order to test the effectiveness of the spliced fiber. Our fiber proof testers can be found in both linear and rotary designs, both for proof and tension testing. Fiber proof testers are available for single mode, multimode, and polarization-maintaining fibers. Pick from dedicated, standalone systems or multi-purpose designs which are also competent at stripping, cleaning, cleaving, splicing, and/or recoating.

Fiber Recoaters with Proof Testers offer easy, integrated methods to recoat and test fusion-spliced fibers. The fiber recoating process restores the buffer coating to a stripped fiber, offering more flexibility when compared to a heat-shrink protection sleeve, enabling it to be handled and coiled without damaging the fusion-spliced section. The integrated linear or rotary proof tester allows users to right away test a recoated fiber with a pre-determined load and find out the long term longevity of the fiber. Because of the ability to restore a fusion-spliced fiber to near original condition, these systems are ideal for applications such as undersea optical fiber cables, submarine communication cabling, fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The procedure starts with the fusion-spliced portion of fiber being placed in the middle of the mold assembly (see image to the correct). Once placed in position, inserts in the fiber blocks secure the spliced fiber in place. Recoat material is pumped to the cavity and after that UV-cured. The recoated fiber may then be tested by pulling onto it as much as a pre-determined load.

Recoater and Mold Assembly Options – Recoaters are available with either a computerized or manual mold assembly. The automatic mold assembly features pneumatic control over the mold plates and it is optimized for high-volume manufacturing applications. Manual mold assemblies, on the contrary, use hinged mold plates which provide more flexibility and are perfect for low-volume manufacturing or R&D applications. An automated or manual volumetric dispensing pump and injection product is utilized to inject the recoat material in to the mold cavity.

The PTR208 automatic recoater comes standard having a mold assembly for FTTH cable production line; For our manual recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes separately in order that customers can choose the right mold coating diameter for their application. Custom mold coating sizes are available as much as Ø900 µm. Pre-installing of the mold assembly in the factory is also available. Contact Tech Support to learn more about custom molds or factory assembly.

We provide you with both high-index (Item # AB950200) and low-index (Item # PC373) recoat materials to use in these recoaters. Recoaters with manual injection pumps (Item #s PTR206B and PTR307B) are compatible with both types of recoat material; all the other recoaters are suitable for the high-index material only. Our manual recoaters having an automatic injection system (Item #s PTR206 and PTR307) may be customized to do business with the low- and-index recoat material; please contact Tech Support for additional information.

Proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters include a built-in linear proof tester, that can take the fiber up to and including predetermined load (20 N) and then releases it. The linear proof tester uses uojthk same fiber holding blocks as the recoater and so the fiber fails to need to be moved prior to testing. The PTR307 and PTR307B Fiber Recoaters have a built-in rotary proof tester, which may perform both proof and tension tests (?89 N). One set of proof test grips is included; replacement proof test grips can be purchased below in packs of 10. Each testing process is fully programmable using the included handset or tablet controller, allowing the consumer to pick parameters like the load, the pace in which the stress is applied, as well as the hold time.

Inserts for Fiber Holding Blocks – Along with the above, we provide a variety of inserts to be used within the fiber holding blocks of the recoaters to be able to support a variety of SZ stranding line. For recoaters using a rotary proof tester, the inserts are compatible with fiber coating diameters in a vary from 125 µm to 900 µm. For recoaters using a linear proof tester, the inserts cover a range for fiber coatings from Ø250 µm to Ø900 µm.